STEERING GEAR BOX GREASE CONVERSION FOR ALL 2.5 TON TRUCKS. 

IF YOUR STEERING GEAR BOX IS LEAKING FROM THE PITMAN ARM SEAL, IT IS A VERY INVOLVED JOB TO CHANGE THAT SEAL. THE JOB INVOLVES EITHER REMOVING THE INJECTION PUMP TO REMOVE THE STEERING GEAR, OR REMOVING/MOVING THE ENGINE OVER. 

WITH BIG MIKE'S GREASE CONVERSION KIT, YOU REPLACE THE OIL WITH #0 GREASE. THIS GREASE IS SEMI FLUID, AND ALTHOUGH IT WILL SLOWLY FLOW AROUND IN THE GEAR BOX, IT IS MUCH LESS LIKELY TO LEAK OUT OF A BAD SEAL.  THIS IS A COMMON CONVERSION FOR MANY THINGS THAT HAVE SLOW SPEED GEARS INSIDE OF THEM. NO REMOVAL OF THE INJECTION PUMP, NO SEAL REPLACMENT, NO MOVING THE ENGINE.

ABOUT A HALF HOUR OF TIME AND YOUR LEAKING PITMAN ARM SEAL WILL NO LONGER BE AN ISSUE. 

THE KIT WILL INCLUDE ONE GREASE FITTING FOR THE DRAIN PLUG, AND 4 TUBES OF GREASE. 

THE CONVERSION IS SIMPLE, REMOVE THE OIL DRAIN PLIG FROM THE GEAR BOX AND DRAIN THE OIL. 

REMOVE THE FILL PLUG FOR THE GEAR BOX. 

INSTALL THE SUPPLIED GREASE FITTING IN THE DRAIN PORT ONCE THE OIL HAS DRAINED AND DISCARD THE ORIGINAL PLUG. THE FITTING WILL SERVE AS THE NEW DRAIN PLUG. 

THE GEAR BOX WILL TAKE ABOUT 3.5 TUBES OF GREASE. PUMP THE GREASE IN WITH A STANDARD GREASE GUN AND FILL UNTIL IT COME OUT OF THE FILL PLUG. 

THE GEAR BOX IS NOW COMPLETELY FULL OF #0 GREASE. REPLACE THE FILL PLUG AND YOU ARE READY FOR USE. 

FOR QUESTONS ABOUT THIS KIT, FEEL FREE TO CONTACT BIG MIKE AT BIGMIKESMOTORPOOL@YAHOO.COM OR CALL 609-894-4123.